Call Park And Call Retrieve; Parking Or Retrieving A Call In The Fac Mode; Parking A Call In The Fac Mode - 2N T58W Pro User Manual

Yealink T58W User Guide
Procedure
1. 1. Swipe left or right to go to the second idle screen.
2. Go to Settings > Features > Dsskey.
3. Select the desired line key.
4. Select Key Event from the Type field.
5. Select Group Pick Up from the Key Type field.
6. Select the desired line from the Account ID field.
7. Do one of the following:
(Optional.) Enter the string that will appear on the phone screen in the Label field.
l
Enter group call pickup code in the Value field.
Select and select the desired contact.
l
8. Select .
Tip : By default, you can drag the line key to the
When any phone within a predefined group of phones receives an incoming call, you can tap the Group Pickup key,
and the call is answered on your phone.

Call Park and Call Retrieve

You can park a call, and then retrieve the call either from your phone or another phone. After parked, the call is
placed on hold, you can continue the conversation after retrieving it.
Note
: Call park is not available on all servers. Check with your system administrator to find out if it is available on your
phone.
Topics

Parking or Retrieving a Call in the FAC Mode

Parking or Retrieving a Call in the Transfer Mode
Parking or Retrieving a Call with a Park or Retrieve Key
Parking or Retrieving a Call in the FAC Mode
You can park the call to the local extension or the desired extension through dialing the park code.
Topics

Parking a Call in the FAC Mode

Retrieving a Parked Call in the FAC Mode
Parking a Call in the FAC Mode
You can park a call in the FAC mode directly. When you park a call to the local extension or the desired extension,
the call is held in the same network on your phone.
Before You Begin
Your system administrator has set call park in the FAC mode.
Procedure
1. During a call, select Park.
The phone will dial the call park code which is pre-configured.
73
Edit field to set it.