Table of Contents
Advertisement
Data Transfer Methods
7. Add a DEVICE command to the end of the CONFIG.SYS file that specifies the location of
the INTERLNK.EXE file. The following example specifies an INTERLNK file that is located
in the DOS directory on the C: drive.
8. Save the changes to your CONFIG.SYS file and exit the text editor. (Typically pressing
<ALT> + <F>, then <X> will save and exit. If using a later version of MS-DOS EDIT, you
will be asked to verify that the changes should be saved. Press <Y> to save changes or <N>
to discard changes.)
9. Using the mobile device, type the following at the MS-DOS prompt:
INTERLNK (now running on the PC/Laptop) should display information about the redirected
drives and printer ports on the mobile device's screen. (See example below.)
10. Restart the PC/Laptop by pressing <CTRL> + <ALT> + <DEL>.
IMPORTANT
11. Locate the files to be transferred to the mobile device from the PC/Laptop. (Use the DOS DIR
and CD commands to locate files.)
12. Copy the specified files from the PC/Laptop to the mobile device. (Use the DOS COPY or
XCOPY commands to copy the specified files from the PC/Laptop.)
Example:
COPY C:\AUTOEXEC.BAT G:\AUTOEXEC.BAT
This example copies a single file (AUTOEXEC.BAT) from the root directory (\C) on the
PC/Laptop to the redirected C drive (\G) on the mobile device.
13. Break the server connection between the two computers by pressing <ALT> + <F4> on the
server keyboard (the mobile device).
E-EQ-MX1DKRG-B
Example: DEVICE=C:\DOS\INTERLNK.EXE
INTERSVR
INTERSVR must be running before starting INTERLNK.
MX1 Cradle Reference Guide
53
Advertisement
Table of Contents
