Table of Contents
Advertisement
INTRODUCTION
Carl Zeiss
Notes on Warranty
MCU 2008
1.3
Notes on Warranty
The manufacturer guarantees that the instrument is free from material and production defects when
delivered. Defects must be notified immediately on identification and maximum efforts must be
undertaken in order to keep the damage as small as possible. On receiving notice of such a defect, the
manufacturer will be under obligation to remove it, at his own option, either by providing adequate
repair services or by delivering a faultless product for replacement. No warranty is given for defects
caused by natural wear (wearing parts in particular) and improper use.
The manufacturer is not liable for damage resulting from faulty operation, negligence, or any other
meddling with the instrument, particularly the removal or replacement of instrument components or the
use of accessories from other manufacturers. Any such case will void the user's warranty claims.
Except for action which is explicitly described in this operating manual, no maintenance or repair work
may be performed. Repairs may only be carried out by Carl Zeiss service staff or specifically authorized
persons. Should any malfunction occur, please get in touch with the Carl Zeiss microscopy service in
Germany (see page 16) or your local Carl Zeiss agency.
8
M60-2-0019 e 05/2012
Advertisement
Table of Contents
