Table of Contents
Advertisement
MCU 2008
3
INSTALLATION
3.1
Connecting the MCU 2008
1
Power connection with fuse compartment
2
Port for X axis of DC XY scanning stage
3
Port for Y axis of DC XY scanning stage
5
Port for joystick
5
USB port for PC
6
CAN port for microscope (2x)
Fig. 3-1
Connecting the MCU 2008
• Connect the axis cables of the scanning stage to the relevant controller inputs (3-1/2, 3).
• Connect the cable of the joystick (optional) to the relevant input (3-1/4).
• Connect the CAN (3-1/6) or the USB connection cable (3-1/5), if used, to the relevant controller
inputs.
• Connect the power cable to the controller (3-1/1) and a suitable power outlet.
M60-2-0019 e 05/2012
INSTALLATION
Connecting the MCU 2008
Carl Zeiss
13
Advertisement
Table of Contents
