Types Of Data That Can Be Cleared; Software Updates; Configure System Updates - EFI Kyocera 17 Configuration And Setup

Note: You can delete an individual print job by right-clicking on the job in the Held or Printed list in Command
WorkStation.

Types of data that can be cleared

The following types of data can be cleared:
•
Held jobs
•
Active jobs
•
Printed jobs
•
Archived jobs that are stored on the server
•
Archived network links to jobs
•
Secure print jobs
•
VDP resources (including FreeForm)
•
Job log
•
FTP log
•
Email log

Software updates

The PS-17 includes multiple update options.
You can install PS-17 updates from Command WorkStation or WebTools.

Configure System Updates

You can use the System Updates feature to schedule updates of the system software.
Plan system updates for when the PS-17 is not in use, such as nights or weekends.
Note: Ensure that the PS-17 remains powered up during the scheduled update times, allowing enough time for the
update to complete.
If you schedule automatic software updates in addition to automatic system backups, we recommend
CAUTION
that you schedule the system backups a minimum of two hours before the software updates. This
ensures a recent backup is available in case a software update causes any issues. Both automatic features
check if Fiery Service is already running before taking action.
While system updates are being installed, print jobs cannot be sent to the PS-17.
The PS-17 automatically reboots during the system update process. It may need to reboot several times.
1 In Configure, log in with Administrator privileges, click Fiery Server > System Updates, and select Enable System
Updates.
Configuration and Setup
Administering the PS-17
59