Reset The Configuration Settings To Factory Defaults From The Printer Control Panel; Clearing The Server - EFI Kyocera 17 Configuration And Setup

Back up settings with Configure
When you back up settings, you can specify which settings you want to save.
1 In Configure, select Fiery Server > Backup.
2 Follow the on-screen instructions to select the settings.
3 Click Backup to back up the selected settings.
Restore settings with Configure
If you have backed up your settings, you can recover them in Configure after a system crash. You can only recover
the settings that were selected for backup.
1 In Configure, select Fiery Server > Restore.
2 Select the backup reference file and the backup data file and click Next.
3 Follow the on-screen instructions to restore your settings and click Finish.

Reset the configuration settings to factory defaults from the printer control panel

If you reset the configuration settings to factory defaults, all the customized configuration settings on
CAUTION
the PS-17 are lost. Before you reset the PS-17 to factory defaults, we recommend that you discuss the
issue with technical support.
Note: You can reset the configuration settings to factory defaults from the printer control panel or in Configure
through Fiery Server > Restore Default Fiery Settings. This procedure describes the printer control panel method (the
Configure command is described in Configure Help). With either method, we recommend that you review all the
configuration settings after the reset and customize as required for your print environment.
1 Print out the configuration page or otherwise record the customized configuration settings. This can be used as a
reference if you want to reenter specific settings after returning the configuration to factory defaults.
2 In Configure, click Fiery Server > Restore Default Fiery Settings.
3 Click the Restore Default Fiery Settings button.
The server automatically reboots in order to apply the factory default settings.
4 Review the configuration settings and customize as required, then reboot to apply the changes.

Clearing the server

You can clear print jobs, VDP resources, and logs from the PS-17 through the Server > Clear Server command in
Command WorkStation.
Note: Before clearing the server, confirm that print jobs are backed up onto your own media as required.
Configuration and Setup
Administering the PS-17
58