Font Number; Append Cr To Lf; Paper Size For System Pages; Printer Default Personality - EFI Kyocera 17 Configuration And Setup

Font number

Designates the default font for the PS-17. To determine font numbers, print the PCL Font list. The standard fonts
are listed in order. The font numbers, however, are not displayed.

Append CR to LF

Specify whether to append a carriage return to each line feed.

Paper size for system pages

Specify the paper size on which PCL system pages are printed.

Printer Default Personality

Sets the personality of the printer. To access this option, choose Configure > RIP > Printer Default Personality.
•
If set to Auto, the PDL type of incoming jobs is automatically detected and sent to the appropriate interpreter.
•
If set to PCL, incoming jobs are sent to the PCL interpreter. If set to PS, incoming jobs are sent to the PS
interpreter.

Variable Data Printing (VDP) settings

To access the VDP settings, open Configure and select RIP > VDP.

FreeForm 1 Record Length

Defines the length of each record, either based on the number of pages in the variable job, or the number of pages in
the FreeForm Master.

Native Document settings

To access the Native Document settings, select Configure > RIP > Native Documents.

Enable Native Document conversion using PrintMe

Enables the PS-17 to process native document file formats through the PrintMe Cloud Service.
Configuration and Setup
Configuring print job processing settings
44