Register Definitions; Binary Outputs; Binary Inputs - HindlePower AT10.1 Series Operating Instructions Manual

8.3

Register Definitions

8.3.1 Binary Outputs

Address Name
00001 Equalize Mode
00002 Manual Timer Method
00003 Manual Equalize Method
00004 Auto-Equalize Timer Method
00005 HVDC Shutdown Enable
00006 Battery Type
- -NOTICE- - Only one (1) equalize method can be active at a time. The equalize method
cannot be turned off. By turning on one (1) of the equalize methods the charger will turn off
the other two (2) equalize methods automatically.

8.3.2 Binary Inputs

Address Name
10001 HVDC
10002 LVDC
10003 DC Output Failure
10004 AC Input Failure
10005 Positive Ground Fault
10006 Negative Ground Fault
10007 CAR
10008 HVDC Shutdown
10009 LVAC Shutdown
10010 FLS Enabled
10011 Temperature Probe Installed
10012 Defective Temperature Probe
Description
1=Equalize Mode, 0=Float Mode
Equalize Method (see notice below)
Equalize Method (see notice below)
Equalize Method (see notice below)
Enables High Voltage DC Shutdown
0=Lead, 1=NiCd, Used for TempCo
Description
High Voltage DC Alarm
Low Voltage DC Alarm
Charger Failure Alarm
AC Input Failure Alarm
Positive Ground Fault Alarm
Negative Ground Fault Alarm
Summary (Common) Alarm Relay
High Voltage DC Shutdown Enabled
Low Voltage AC Shutdown Enabled
Forced Load Share Enabled
Temperature Probe Installed
Defective Temperature Probe Alarm
MODBUS
31