HindlePower AT10.1 Series Operating Instructions Manual page 22

DNP V3.00
DNP V3.00
DEVICE PROFILE DOCUMENT
(Also see the Implementation Table in Section 7.3 on page 22.)
Requires Application Layer Confirmation:
Never
Always
When reporting Event Data
When sending multi-fragment responses
Sometimes
Configurable
Timeouts while waiting for:
Data Link Confirm:
Complete Appl. Fragment:
Application Confirm:
Complete Appl. Response:
Others:
Inter-character Timeout:
Select/Operate Arm Timeout:
Binary input change scanning period:
Analog input change scanning period:
Unsolicited offline interval:
Unsolicited response notification delay:
Delay Measurement:
Synchronization:
Sends/Executes Control Operations:
WRITE Binary Outputs
SELECT/OPERATE
DIRECT OPERATE
DIRECT OPERATE - NO ACK
Count > 1
Pulse On
Pulse Off
Latch On
Latch Off
Queue
Clear Queue
Explanation of Sometimes: See the Binary Outputs point list in Section 7.4.2 on page 26 for a description
of which control operations are supported for each point.
20
None Fixed at 2000
None Fixed at ____
None Fixed at 2000
None Fixed at ____
Fixed at 50 ms.
Fixed at 5000 ms.
Fixed at 5000 ms.
Fixed at 5000 ms.
Fixed at 30000 ms if unsolicited messages is off
Configurable if unsolicited messages is on. See setup.
Fixed at 15000 ms.
100 ms.
1000 ms.
Never Always
Never Always
Never Always
Never Always
Never Always
Never Always
Never Always
Never Always
Never Always
Never Always
Never Always
Variable Configurable.
Variable Configurable
Variable Configurable,.
Variable Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable