Table of Contents
Advertisement
7.4.5 Internal Indications
Internal Indications
Object Number:
Request Function Codes supported:
Default Variation reported
when variation 0 requested:
Point
Descriptions and Conditions
Index
IIN1-0
All Stations – set after a broadcast message (any message using a destination
0
address of 0xfff0 or above) has been received. Does not indicate an error condition.
IIN1-1
Class 1 event data available. Can be set at any time and does not indicate an error
1
condition.
IIN1-2
Class 2 event data available. Can be set at any time and does not indicate an error
2
condition.
IIN1-3
Class 3 event data available. Can be set at any time and does not indicate an error
3
condition.
IIN1-4
Time synchronization required. Can be set at any time and does not indicate an error
4
condition.
5
IIN1-5
Local mode. Set if some points are uncontrollable via DNP.
6
IIN1-6
Device Trouble.
7
IIN1-7
Device restart. Set only under specific conditions. Does not indicate an error condition.
IIN2-0
Function Unknown. Generally means that the function code (octet 2 of the request
8
header) cannot be processed.
IIN2-1
Object Unknown. Generally means that the function code could be processed but the
9
object group / variation could not be processed.
IIN2-2
Parameter Error. Generally indicates that both the function code and object group /
10
variation could be processed but that the qualifier / range field is in error.
IIN2-3
Buffer Overflow. Indicates that an event buffer has overflowed, and that change
11
events, of at least one (1) type, have been lost.
12
IIN2-4
Already Executing
13
IIN2-5
Bad configuration.
14
IIN2-6
Reserved. Always 0.
15
IIN2-7
Reserved. Always 0.
80
1 (read), 2 (write)
1
DNP V3.00
Writable?
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
29
Advertisement
Table of Contents
