Fault Data Mode - Siemens 7SR23 DAD Manual

QUICK LOGIC METERS
to view
E 1-8
E 9-16
E1 Equation
EQN
TMR 0-0
CNT 0-1
En Equation
1.5

Fault Data Mode

The Fault Data Mode sub menu lists the time and date of the previous ten protection operations. The stored data
about each fault can be viewed by pressing the TEST/RESET
operated elements, analogue values and LED flag states at the time of the fault. The data is viewed by scrolling
down using the button.
©2013 Siemens Protection Devices Limited
Chapter 2) 7SR23 DAD Settings, Configuration & Instruments Guide
0
= 0
= 0
= 0
button. Each record contains data on the
Chapter 2 Page 11 of 18