Page 3
Wall-Mount Installation The MPD-955-WM is used when the MPD-955 is to be installed onto a wall or ceiling in pendant configuration. The wall mount includes hardware necessary for installation. 1. Using the wall mount as a template, mark the location of the three mounting holes. Drill holes at these locations and insert the anchors provided.
Page 4
8. Turn the lower dome counter-clockwise to remove it. Make camera and lens adjustments as necessary and replace lower dome. 9. Secure the dustproof cover, shiny side up, by aligning the holes in the cover with the raised tabs on the top of the mount. Completed Installation 2 • Installation XX194-65-00 Rev 609 MPD-955-WM...
Page 5
Shipping Instructions Use the following procedure when returning a unit to the factory: 1. Call or write Vicon for a Return Authorization (R.A.) at one of the locations listed below. Record the name of the Vicon employee who issued the R.A.
Page 6
Indoor. Mounting: Wall/ceiling in pendant configuration. Dimensions: Height: 5.0 in. (127 mm). Width: 5.8 in. (147 mm). Depth: 7.5 in. (190 mm) Weight: 0.4 lb (0.18 kg). Construction: Plastic (ABS); ivory finish. 4 • Technical Information XX194-65-00 Rev 609 MPD-955-WM...
Page 7
Software supplied either separately or in hardware is furnished on an “As Is” basis. Vicon does not warrant that such software shall be error (bug) free. Software support via telephone, if provided at no cost, may be discontinued at any time without notice at Vicon’s sole discretion.
Page 8
Vicon Industries Inc. Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 631-952-CCTV (2288) 800-645-9116 Fax: 631-951-CCTV (2288) Vicon Europe Headquarters Brunel Way Fareham, PO15 5TX United Kingdom +44 (0) 1489 566300 Fax: +44 (0) 1489 566322 Germany vin-videotronic infosystems gmbh...
Need help?
Do you have a question about the MPD-955-WM and is the answer not in the manual?
Questions and answers