Icom IP501M Service Manual page 10

2. REMOVING THE MAIN-A UNIT (CONTINUED)
3) Unsolder the 2 points of the DC power cables, and a
point of the ignition cable.
MAIN-A UNIT
DC power cables
Ignition cable
4) Remove the 7 screws, and then remove the MAIN-A
UNIT from the chassis.
UNSOLDER
Solder
remover
Chassis
Screws ×7
MAIN-A UNIT
Chassis
3. REMOVING THE FRONT-D UNIT
1) Remove the dial knob and nut from the front panel.
Dial knob
Nut
2) Remove the 2 screws, and then remove the FRONT-D
UNIT from the front panel.
FRONT-D UNIT
Screws ×2
4. REMOVING THE FRONT-C UNIT
Remove the 2 screws, and then remove the FRONT-C
UNIT from the front panel.
FRONT-C UNIT
Screws ×2
3-2
Front panel
Front panel
Front panel