Readbuffer8; Clearrxbuffer; Table 3-13: Readbuffer8 Command; Table 3-14: Readbuffer8 Response - Semtech LR1110 User Manual

3.6.5 ReadBuffer8

The command ReadBuffer8( ) allows reading a block of Len Bytes in the radio RX buffer starting at a specific offset. RX buffer
has to be implemented as a ring buffer.
ReadBuffer8 Command
Table 3-13:
Byte
Data from Host
Data to Host
ReadBuffer8 Response
Table 3-14:
Byte 0
Data from Host 0x00
Data to Host Stat1

3.6.6 ClearRxBuffer

The command ClearRxBuffer( ) allows clearing all data in the radio RX buffer. It will write '0' on the whole Rx buffer. It is
mainly used for debug purpose to ensure the data in the Rx buffer is not from the previous packet..
ClearRxBuffer Command
Table 3-15:
Byte
Data from Host
Data to Host
LR1110
User Manual Rev.1.0
UM.LR1110.W.APP March 2020
0
0x01
Stat1
1
0x00
Data1
0 1
0x01 0x0B
Stat1 Stat2
www.semtech.com
1
0x0A Offset (7:0)
Stat2 IrqStatus (31:24)
2 3
0x00 0x00
Data2 Data3
2 3
Len (7:0)
IrqStatus (23:16)
...
...
... DataN
N
0x00
29 of 130
Semtech