Gnss Configuration / Status Operations; Cryptoelement Configuration / Status Operations; Table 15-5: Gnss Scanning Configuration / Status Operations; Table 15-6: Cryptoelement Configuration / Status Operations - Semtech LR1110 User Manual

15.5 GNSS Configuration / Status Operations

Table 15-5: GNSS Scanning Configuration / Status Operations

Command
GnssSetConstellationToUse
GnssSetMode
GnssAutonomous
GnssAssisted
GnssSetAssistance
Position
GnssGetNbSvDetected
GnssGetSvDetected
GnssGetConsumption
GnssGetResultSize
GnssReadResults
GnssAlmanacFullUpdate

15.6 CryptoElement Configuration / Status Operations

Table 15-6: CryptoElement Configuration / Status Operations

Command
CryptoSetKey
CryptoDeriveAndStoreKey
LR1110
User Manual Rev.1.0
UM.LR1110.W.APP March 2020
opcode Parameters
0x0400 ConstellationBitMask
0x0408 GnssMode
EffortMode
0x0409 ResultMask
NbSvMax
Time
EffortMode
0x040A
ResultMask
NbSvMax
Latitude
0x0410
Longitude
0x0417
0x0418
0x0419
0x040C
0x040D
0x040E AlmanacFullUpdatePayload
opcode Parameters
KeyID(7:0)
0x0502
Key[1..16]
SrcKeyID(7:0)
0x0503 DstKeyID(7:0)
Nonce[1..16]
www.semtech.com
Sets the GNSS constellation to use for the
Configures the GNSS Scanning as single or
Triggers the GNSS Autonomous Scanning
Triggers the GNSS Assisted Scanning
Configures the approximate position for the
Returns the number of SV detected during
-
Returns the list of SV detected during the
-
last GNSS Scanning, with their C/N0
Returns the radio capture and CPI
- processing duration of the last GNSS
- Returns the results payload size
- Returns the results payload byte stream
Updates all the Almanac Data
Description
GNSS Scanning
dual capture
GNSS Assisted mode
the last GNSS Scanning
Scanning
Description
Derive and store a key.
124 of 130
Semtech