Getversion; Table 2-9: Calibparams Command; Table 2-10: Getversion Command; Table 2-11: Getversion Response - Semtech LR1110 User Manual

With CalibParams defined as follows:

Table 2-9: CalibParams Command

Bits (7:6)
Name RFU
The command will operate in any mode of the device. At the end of the calibration procedure, the device returns to Standby
RC.

2.5 GetVersion

The command GetVersion() returns the version of the LR1110.

Table 2-10: GetVersion Command

Byte
Data from Host
Data to Host

Table 2-11: GetVersion Response

Byte
Data from Host
Data to Host
• HW Version is the version of the LR1110 hardware
• Use Case describes the main device features:
0x01 = Transceiver

0x02 = Modem

• FW Major + FW Minor is the version of the LR1110 internal firmware stored in flash memory.
LR1110
User Manual Rev.1.0
UM.LR1110.W.APP March 2020
5 4
PLL_TX IMG
0
0x01
Stat1
0 1
0x00 0x00
Stat1 HW Version
www.semtech.com
3 2
ADC PLL
1
0x01
Stat2
2 3
0x00 0x00
Use Case FW Major
1 0
HF_RC LF_RC
4
0x00
FW Minor
21 of 130
Semtech