Garmin G1000 Pilot's Manual page 260

HAZARD AVOIDANCE
XM SATELLITE WEATHER ON THE NAVIGATION MAP PAGE
Use the Map Setup Window (Figure 6-36) to customize the display of weather data on the Navigation Map
Page. The Map Setup Window settings control the display of weather data on all G1000 pages except the
Weather Data Link Page.
Setting up and customizing weather data on the Navigation Map Page:
1) On the Navigation Map Page, press the MENU Key.
2) While the 'Map Setup' selection is highlighted, press the ENT Key.
3) Turn the small FMS Knob to display the group selection window. Turn the small FMS Knob to select 'Weather
Group', and press the ENT Key.
4) Turn the large FMS Knob to highlight and move between the product selections.
5) When an item is highlighted, turn the small FMS Knob to select the desired option.
6) Press the ENT Key.
The following options are available:
• NEXRAD DATA – Turns the display of NEXRAD data and radar coverage on or off. Selects the display
range.
• XM LTNG – Turns the display of XM Lightning on or off. Selects the display range.
• CELL MOVEMENT – Turns the display of storm cell movement on or off. Cell Movement is shown only
when NEXRAD is turned on.
6-28
Figure 6-36 Map Setup Options
Garmin G1000 Pilot's Guide for the Quest Kodiak 100 190-00590-00 Rev. C