Softkey Function - Garmin G1000 Pilot's Manual

SOFTKEY FUNCTION

The softkeys are located along the bottoms of the displays. The softkeys shown depend on the softkey level
or page being displayed. The bezel keys below the softkeys can be used to select the appropriate softkey. When
a softkey is selected, its color changes to black text on gray background and remains this way until it is turned
off, at which time it reverts to white text on black background.
In the following descriptions, top level softkeys are denoted by bullets.
Bezel-Mounted
Softkeys (Press)
The MFD/PFD Control Unit can also be used to select softkeys.
PFD SOFTKEYS
Softkey ON
INSET – Press to display the Inset Map in the lower left corner of the PFD.
OFF – Press to remove the Inset Map.
DCLTR (3) – Press momentarily to select the desired amount of map detail. The declutter level appears adjacent to the
DCLTR softkey.
• No declutter: All map features are visible
• Declutter – 1: Declutters land data
• Declutter – 2: Declutters land and SUA data
• Declutter – 3: Removes everything except the active flight plan
TRAFFIC – Press to display traffic on the inset map.
TOPO – Press to display topographical data (i.e., coastlines, terrain, rivers, lakes) and elevation scale on the Inset
Map.
190-00590-00 Rev. C
Figure 1-9 Softkeys (Second-Level PFD Configuration)
.
Softkey OFF
INSET PFD OBS
Figure 1-10 PFD Top Level Softkeys
Garmin G1000 Pilot's Guide for the Quest Kodiak 100
Softkey Selection
Softkey
Box (Light Blue)
On
CDI XPDR IDENT TMR/REF NRST
SYSTEM OVERVIEW
Softkey Names
(Displayed)
ALERTS
1-13