Garmin G1000 Pilot's Manual page 203

A
CCESSING THE
'Closest Point of FPL' calculates the bearing and closest distance at which a flight plan passes from a
reference waypoint. It can also be used to create a new user waypoint along the flight plan at the location
closest to a chosen reference waypoint.
Determining the closest point along the active flight plan to a selected waypoint:
1) From the Active Flight Plan Page, press the MENU Key.
2) Select 'Closest Point of FPL'.
3) Pr ess the ENT Key. A window is displayed with the reference waypoint field highlighted.
4) Enter the identifier of the reference waypoint.
5) Pr ess the ENT Key.
6) The G1000 displays the location, lat/lon, bearing (BRG), and distance (DIST) to the closest point along the flight
plan from the selected reference waypoint. To create a user waypoint at this location and add it to the flight plan,
highlight 'LOAD' and press the ENT Key. The name for the new user waypoint is derived from the identifier of the
reference waypoint.
C
HANGING THE
'Change Fields' allows the default fields of DTK (distance) and DIS (distance) to be changed to the
following:
• CUM (cumulative distance)
• DIS (distance)
• DTK (desired track)
• ESA (estimated safe altitude)
• ETA (estimated time of arrival)
• ETE (estimated time enroute)
Changing either the DTK or the DIS field:
1) With the Active Flight Plan Page displayed, press the MENU Key.
2) Highlight 'Change Fields'.
3) Pr ess the ENT Key.
4) Highlight the 'DIS' or 'DTK' field.
5) Turn the small FMS Knob to display a list of options (Figure 5-74) .
6) Select the desired item.
7) Pr ess the ENT Key.
8) Pr ess the FMS Knob to remove the cursor.
190-00590-00 Rev. C
C P F
LOSEST OINT OF LIGHT
C D F
ONFIGURABLE ATA IELDS IN THE
Garmin G1000 Pilot's Guide for the Quest Kodiak 100
P W
LAN INDOW
W L
AYPOINT IST
GPS NAVIGATION
5-87