Garmin G1000 Pilot's Manual page 193

L W
OAD AYPOINT
'Load Waypoint' allows a waypoint to be added to the flight plan which was selected by panning the
map.
Adding a waypoint to the flight plan which was selected by panning the map:
1) Activate map panning from the Active Flight Plan Page.
2) Select a map position.
3) Press the MENU Key.
4) Highlight 'Load Waypoint' from the menu list (Figure 5-66).
5) Press the ENT Key.
6) The new user waypoint is inserted into the flight plan before the waypoint in the list that was previously
highlighted. If nothing is highlighted, it will be placed at the end of the flight plan.
190-00590-00 Rev. C
Figure 5-65 Changing Flight Plan Name
Garmin G1000 Pilot's Guide for the Quest Kodiak 100
GPS NAVIGATION
5-77