Garmin G1000 Pilot's Manual page 26

SYSTEM OVERVIEW
IDENT – Press to provide special aircraft position identification to Air Traffic Control (ATC).
TMR/REF – Press to display the Timer/References window.
NRST – Press to display the Nearest Airports window.
ALERTS – Press to display the Alerts window.
1.3 MFD SOFTKEYS
ENGINE – Pressing this softkey makes available the Engine Page functions. Refer to the Engine Indication System section.
MAP – Pressing this softkey enables the following softkeys:
TRAFFIC – Pressing this softkey displays/removes Traffic on the Navigation Map.
TOPO – Pressing this softkey displays or removes topographic information on the Navigation Map.
TERRAIN – Pressing this softkey displays/removes terrain and obstacle data on the Navigation Map.
Press the BACK softkey on this level to
return to the top softkey level
ENGINE SYSTEM FUEL
ENGINE SYSTEM
FUEL
STRMSCP (optional) – Pressing this softkey displays/removes Stormscope lightning data on the Navigation Map.
NEXRAD (optional) – Pressing this softkey displays/removes precipitation data on the Navigation Map.
XM LTNG (optional) – Pressing this softkey displays/removes XM Radio lightning data on the Navigation Map.
BACK – Pressing this softkey displays the ENGINE and MAP top level softkeys.
DCLTR (declutter) – Pressing this softkey removes map information in three levels.
1-16
ENGINE MAP
BACK
BACK
DEC FUEL INC FUEL RST FUEL
Figure 1-14 MFD Softkeys
Garmin G1000 Pilot's Guide for the Quest Kodiak 100
DCLTR
DCLTR-1
DCLTR-2
DCLTR-3
(optional)
TERRAIN
TRAFFIC TOPO STRMSCP
The DONE softkey changes to UNDO when the checklist
item is already checked
DONE
ENGINE
ENGINE
CHKLIST
(optional)
Press to return to the
top softkey level
(optional) (optional)
NEXRAD XM LTNG BACK
EXIT EMERGCY
CLR
MAP DCLTR CHKLIST
190-00590-00 Rev. C