Garmin G1000 Pilot's Manual page 180

GPS NAVIGATION
Selecting a nearest ARTCC and frequency:
1) With the Nearest Frequencies Page displayed, press the FMS Knob to activate the cursor.
2) Turn the small FMS Knob to select the desired nearest ARTCC.
3) Turn the large FMS Knob to select the desired ARTCC frequency.
4) Press the ENT Key to load the frequency into the COM frequency standby field.
OR:
1) With the Nearest ARTCC Page displayed, press the ARTCC Softkey to place the cursor in the 'NEAREST ARTCC'
window.
2) Turn the small FMS Knob to select the desired nearest ARTCC.
3) Turn the large FMS Knob to select the desired ARTCC frequency.
4) Press the ENT Key to load the frequency into the COM frequency standby field.
OR:
1) With the Nearest Frequencies Page displayed, press the MENU Key.
2) Select the option 'Select ARTCC Window' and press the ENT Key. The cursor is placed in the 'NEAREST ARTCC'
field.
3) Turn the small FMS Knob to select the desired nearest ARTCC.
4) Turn the large FMS Knob to select the desired ARTCC frequency.
5) Press the ENT Key to load the frequency into the COM frequency standby field.
5-64
Figure 5-59 Nearest Frequencies Page Menu
Garmin G1000 Pilot's Guide for the Quest Kodiak 100 190-00590-00 Rev. C