Garmin G1000 Pilot's Manual page 199

Loading an arrival procedure using the LD STAR Softkey:
1) From the Active Flight Plan Page, select the LD STAR Softkey.
2) The ARRIVAL window is displayed on the 'PROC – ARRIVAL LOADING' Page (Figure 5-70).
3) Select an arrival.
4) Press the ENT Key. The TRANSITION window is displayed.
5) Select a transition.
6) Press the ENT Key. The RUNWAY window may be displayed. If so, select a runway.
7) Press the ENT Key.
8) With 'LOAD' highlighted, press the ENT Key. The arrival procedure is displayed as part of the overall flight plan
and is placed in front of the enroute flight plan.
Available Arrivals
for the Destination
Loading an arrival procedure using the PROC Key:
1) From the Active Flight Plan Page, press the PROC Key.
2) Highlight 'SELECT ARRIVAL'.
3) Press the ENT Key. The ARRIVAL window is displayed on the 'PROC – ARRIVAL LOADING' Page.
4) Select an arrival.
5) Press the ENT Key. The TRANSITION window is displayed.
6) Select a transition.
7) Press the ENT Key. The RUNWAY window may be displayed. If so, select a runway.
8) Press the ENT Key.
9) With 'LOAD' highlighted, press the ENT Key. The arrival procedure is displayed as part of the overall flight plan
and is placed in front of the enroute flight plan.
190-00590-00 Rev. C
Airport
Figure 5-70 Available Arrivals
Garmin G1000 Pilot's Guide for the Quest Kodiak 100
GPS NAVIGATION
5-83