Garmin G1000 Pilot's Manual page 218

GPS NAVIGATION
12) Press the ENT Key. 'LOAD?' is highlighted.
13) Press the ENT Key. The departure will be active when the flight plan is active.
OR::
1) With the Departure Loading Page displayed (Figure 5-88), press the FMS Knob to activate the cursor.
2) Enter an identifier, facility name or city location field.
3) Press the ENT Key until the DEPARTURE window is displayed.
4) Select a departure.
5) Press the ENT Key. The RUNWAY window may be displayed.
6) Select a runway.
7) Press the ENT Key. The TRANSITION window may be displayed.
8) Select a transition.
9) Press the ENT Key. The departure is now ready to load.
10) Press the FMS Knob to remove the cursor.
Identifier
Location
Map Showing
Selected
Departure
5-102
Figure 5-88 Departure Loading Page
Garmin G1000 Pilot's Guide for the Quest Kodiak 100
Airport
Symbol
Airport Usage
Facility Name
Available
Departures
List of Legs
in Departure
Sequence
190-00590-00 Rev. C