Garmin G1000 Pilot's Manual page 200

GPS NAVIGATION
Loading an arrival procedure using the Active Flight Plan Page Menu:
1) From the Active Flight Plan Page, press the MENU Key.
2) Highlight 'Load Arrival'.
3) Press the ENT Key. The ARRIVAL window is displayed on the 'PROC – ARRIVAL LOADING' Page.
4) Select an arrival.
5) Press the ENT Key. The TRANSITION window is displayed.
6) Select a transition.
7) Press the ENT Key. The RUNWAY window may be displayed. If so, select a runway.
8) Press the ENT Key.
9) With 'LOAD' highlighted, press the ENT Key. The arrival procedure is displayed as part of the overall flight plan
and is placed in front of the enroute flight plan.
A L
CTIVATE EG
'Activate Leg' selects the highlighted leg as the "active leg" (the flight plan leg which is currently used for
navigation guidance). A flight plan along a specific leg can be activated using two possible methods:
• ACT LEG Softkey
• Active Flight Plan Page Options Menu
Activating a flight plan along a specific leg using the ACT LEG Softkey:
1) Highlight the desired destination waypoint from the Flight Plan list.
2) Select the ACT LEG Softkey. A confirmation window is displayed (Figure 5-71).
3) With 'Activate' highlighted, press the ENT Key. To cancel the operation, select 'CANCEL' and press the ENT
Key.
Activating a flight plan along a specific leg using the options menu:
1) Highlight the desired destination waypoint.
2) Press the MENU Key.
3) Select 'Activate Leg'.
4) Press the ENT Key. A confirmation window is displayed.
5) With 'Activate' highlighted, press the ENT Key.
5-84
Figure 5-71 Activate Leg Command
Garmin G1000 Pilot's Guide for the Quest Kodiak 100 190-00590-00 Rev. C