Garmin G1000 Pilot's Manual page 24

SYSTEM OVERVIEW
TERRAIN – Press to display terrain information on the Inset Map.
STRMSCP (optional) – Press to display the Stormscope lightning data on the Inset Map (within a 200 nm radius of
the aircraft).
NEXRAD (optional) – Press to display NEXRAD precipitation data on the Inset Map.
XM LTNG (optional) – Press to display the XM Radio lightning data on the Inset Map.
BACK – Press to return to the previous level softkey configuration.
ALERTS – Press to display the Alerts window.
PFD – Press to display the additional softkeys for additional configuration of the PFD.
METRIC – Press to display the current and reference altitudes in meters, in addition to feet. Pressing the metric softkey
also changes the barometric setting to hectopascals.
DFLTS – Press to reset default settings on the PFD.
BRG1 (bearing) – Press to cycle through the following information:
NAV1 – Displays NAV1 waypoint frequency or identifier in the BRG1 information window.
GPS – Displays GPS waypoint identifier and GPS distance information in the BRG1 information window.
OFF – Removes the BRG1 information window.
METRIC
Press the DFLTS softkey to change the PFD
metric values to standard
1-14
DCLTR TRAFFIC
OFF TOPO
Press the BACK or OFF softkey
to return to the top level
DCLTR-1
softkeys
DCLTR-2
DCLTR-3
Figure 1-11 PFD Softkey Flow Chart – 1
DFLTS BRG1 360 HSI
Figure 1-12 PFD Softkey Flow Chart – 2
Garmin G1000 Pilot's Guide for the Quest Kodiak 100
INSET
(optional) (optional) (optional)
TERRAIN STRMSCP NEXRAD
XM LTNG
PFD
ARC HSI BRG2 STD BARO
Press the STD BARO or BACK softkeys
to return to the top level softkeys
BACK ALERTS
BACK ALERTS
190-00590-00 Rev. C