Advertisement
Quick Links
H-3456
SLIMFOLD™ TOWEL
DISPENSER
TOOLS NEEDED
Drill
Dispenser x 1
NOTE: Recommended mounting height is 52"
from the floor to bottom of dispenser.
1.
Insert dispenser key into hole in top of dispenser and
turn counterclockwise to unlock. (See Figure 1)
Figure 1
2. Open dispenser cover and hold dispenser to ideal
mounting place on wall. (See Figure 2)
Figure 2
PAGE 1 OF 2
1-800-295-5510
uline.com
Drill Bit
Phillips Screwdriver
Wall Anchor x 4
INSTALLATION AND MOUNTING INSTRUCTIONS
PARTS LIST
3. Mark the four holes on the wall where screws will be
inserted. (See Figure 3)
Figure 3
Screw x 4
Dispenser Key x 1
0721 IH-3456
Advertisement
Related Manuals for U-Line SLIMFOLD H-3456
Summary of Contents for U-Line SLIMFOLD H-3456
- Page 1 H-3456 1-800-295-5510 uline.com SLIMFOLD™ TOWEL DISPENSER TOOLS NEEDED Drill Drill Bit Phillips Screwdriver PARTS LIST Dispenser x 1 Wall Anchor x 4 Screw x 4 Dispenser Key x 1 INSTALLATION AND MOUNTING INSTRUCTIONS 3. Mark the four holes on the wall where screws will be NOTE: Recommended mounting height is 52"...
- Page 2 INSTALLATION AND MOUNTING INSTRUCTIONS CONTINUED 4. Drill into wall at four marked locations with an Close and lock dispenser by turning key clockwise appropriate drill bit. (See Figure 4) to its original position. (See Figure 7) NOTE: Ensure that proper mounting hardware Figure 7 is used for appropriate wall composition as enclosed hardware may not be compatible...
Need help?
Do you have a question about the SLIMFOLD H-3456 and is the answer not in the manual?
Questions and answers