Table of Contents
Advertisement
Grades
Gradeline marking
step-by-step
Field
Description
dH
Difference in height between the measured point and the grade point.
Hz
Current horizontal angle.
HD
Measured horizontal distance.
Step
Description
1.
Enter a desired point ID (PtID:).
2.
Aim at the target point and press Meas Pt. The height difference (dH:) and
horizontal distance difference (dHD:) will display.
3.
Turn the telescope until the height difference (dH:) is zero, then repeat
the measurement.
If the sign is negative the stake out point is further away
than the measured point. If the sign is positive the stake out
point is closer than the measured point.
If the sign is negative the stake out point is above the meas-
ured point. If the sign is positive the stake out point is below
the measured point.
FlexLine/FlexLine plus, 28
Advertisement
Table of Contents
