OFFSET
Offset step-by-
step
Offset
Step
Description
1.
Enter a desired point ID (PtID:) and the offset value.
2.
Select the offset definition, Left, Right, Up or Down.
3.
Aim at the target point and press Meas Pt. The measurement is triggered
and stored.
After storing, the application returns to the Offset screen.
4.
To measure a new point, repeat steps 1. to 3.
Next step
Press Meas Pt to measure and record data for the current point and proceed to
measure another point.
Meas Pt
To start angle and distance measure-
ments and save the measured values.
Dist
To start distance and angle measure-
ments without saving the measured
values.
Quit
To exit the application and return to
the Continue with... screen.
FlexLine/FlexLine plus, 35