Table of Contents
Advertisement
Mining Data Manager
Uploading step-by-
step
Step
Description
6.
Enter the number of sets.
7.
Press Save to save the tolerances.
8.
Refer to "Uploading step-by-step" to upload tolerances to the instrument.
Step
Description
1.
Connect the instrument via the serial interface RS232 or the USB cable to
the computer. The instrument interface settings must be set to
Port: RS232, Port: USB or Port: Automatically.
2.
In Mining Data Manager, open a project: Project -> Open.
3.
Choose Upload: Data Upload -> Send to instrument.
4.
Select a job folder on the instrument to save the data into.
If the selected job already has data, all existing data will be over-
written by the new file being uploaded.
5.
Enter a jobname, operator and comments. Operator and comments are
optional.
6.
Select a tolerance type and select Upload.
7.
The file uploading will begin and a status bar will indicate the progress.
FlexLine/FlexLine plus, 40
Advertisement
Table of Contents
