Download
Share
Print this page
Backyard Products GABLE Assembly Manual
  1. Manuals
  2. Brands
  3. Backyard Products Manuals
  4. Outdoor Storage
  5. GABLE
  6. Assembly manual
Backyard Products GABLE Assembly Manual

Backyard Products GABLE Assembly Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
For questions on assembly or for general inquiries, you may contact us in the following ways:
Call a Recruiter Today! 734-365-7000
Flexible schedule
*based on number of completed installations
Call Us First!
DO NOT RETURN TO STORE.
Call customer service: 1-877-743-3400
AVOID THE WAIT!
visit us online at
help.backyardproducts.com
Submit a help request
Answers to frequently asked questions
Live chat with an agent
Did you enjoy building your shed?
JOIN OUR TEAM
AND MAKE UP TO $1,500/WEEK*
No selling,
just building
Bonus incentives
available
16770-C

Advertisement

loading

Related Manuals for Backyard Products GABLE

Summary of Contents for Backyard Products GABLE

  • Page 1 16770-C Call Us First! DO NOT RETURN TO STORE. For questions on assembly or for general inquiries, you may contact us in the following ways: Call customer service: 1-877-743-3400 AVOID THE WAIT! visit us online at help.backyardproducts.com Submit a help request Answers to frequently asked questions Live chat with an agent Did you enjoy building your shed?

  • Page 2: How To Enter

    $500 gift card. Write a Backyard Products, LLC. product review at backyardreviews.net for a chance to win a $500 Visa gift card. No purchase necessary to enter. Must be legal U.S. resident (including DC & Puerto Rico), 18 or older to participate. Taxes on prize are responsibility of winner. Odds of winning depend on the number...

  • Page 3: Assembly Manual

    16770-C 12/20/2021 ASSEMBLY MANUAL GABLE 10' x 8' (305 x 244) BUILDING SIZE ACTUAL FLOOR SIZE 10' x 8' (305 x 244 cm) BASE MODEL 10' x 7' 8-5/8" (305 x 235,3 cm) ADD ONE 10' x 4' 10' x 12' (305 x 365,8 cm) 10' x 11' 8-5/8"...
  • Page 4 TOOLS Required Optional ❑ Phillips ❑ Tool Belt/ ❑ Utility Knife Screwdriver Nail Pouch ❑ Shingle Blades ❑ Drill / Driver ❑ Tin Snips ❑ 3/8" Drill Bit ❑ Caulk Gun (for drip edge) ❑ #2 Philips Drive Bit ❑ Chalk Line ❑...

  • Page 5: Parts List

    PARTS IDENTIFICATION AND SIZES Part identification is WOOD SIZE CONVERSION CHART Treated lumber is stamped: stamped on some parts. Nominal Board Size Actual Size 2 x 4 ....1-1/2" x 3-1/2" (3,8 x 8,9 cm) 1 x 4 ....3/4" x 3-1/2" (1,9 x 8,9 cm) 2 x 3 ....1-1/2"...
  • Page 6 WALL PANEL & DOORS PARTS LIST RIGHT LEFT 3/8 x 48 x 72" LEFT DOOR (1 x 122 x 183 cm) RIGHT DOOR ROOF PANELS 48" x 96" 19" x 48" (122 x 244 cm) (48 x 122 cm) Roof panels are 7/16"...
  • Page 7 ROOF PANELS 48" x 96" (122 x 244 cm) 19" x 48" (48 x 122 cm) Roof panels are 7/16" (11 mm) thick. 2" (5,0 cm) 1 lb. of 2" (5,0 cm) 48" x 96" 19" x 48" (122 x 244 cm) (48 x 122 cm) Roof panels are 7/16"...

  • Page 8: Additional Materials

    ADDITIONAL MATERIALS FOUNDATION OR FLOOR MATERIALS • Your shed kit does not include a wood oor frame or oor panel materials. • See page 8 for the additional oor panel sizes and quantities required. • This shed does not include any leveling materials. •...
  • Page 9 CONCRETE FOUNDATION If you choose to install your kit on a concrete slab refer to the diagram below. Install the sill plates on the foundaton as shown, and continue on to page 21. Treated Sill Plate Caulk between sill plate and concrete.
  • Page 10 FLOOR FRAME (Not Included) You may need treated 2 x 4" boards cut to size and nails to complete your foor. Floor panel sizes and quantities are shown below. MUST be treated lumber. 2 x 4 x 48" (5 x 10 x 122 cm) 2 x 4 x 72"...
  • Page 11 OPTIONAL WOOD FRAME FLOOR LEVELING OPTIONS There are multiple ways to level your floor frame. Our recommended leveling method is shown below. Leveling materials are not included in this kit. PREFERRED METHOD - 4x4 TREATED RUNNERS (Typical for 10' x 12' Kit) Seam Runners are generally 4x4 Runners...

  • Page 12: Parts Required

    10' x 8' FLOOR FRAME (Not Included) PARTS REQUIRED: 3" (7,6 cm) 2 x 4 x 72" (5 x 10 x 183 cm) Treated Wood 2 x 4 x 89-1/2" (5 x 10 x 227 cm) Treated Wood 2 x 4 x 48" (5 x 10 x 122 cm) Treated Wood BEGIN Orient parts as shown on flat surface.
  • Page 13 10 x 12' FLOOR FRAME (Not Included) PARTS REQUIRED: 3" (7,6 cm) 2 x 4 x 72" (5 x 10 x 183 cm) 2 x 4 x 48" (5 x 10 x 122 cm) 2 x 4 x 45" (5 x 10 x 114,3 cm) You will build (2) floor sections.
  • Page 14 10 x 16' FLOOR FRAME (Not Included) PARTS REQUIRED: 3" (7,6 cm) 2 x 4 x 72" (5 x 10 x 183 cm) 2 x 4 x 48" (5 x 10 x 122 cm) 2 x 4 x 93 " (5 x 10 x 236,2 cm) You will build (2) floor sections.
  • Page 15 LEVEL AND SQUARE FLOOR FRAME Before attaching floor decking, it is important to level and square the floor frame. A level and square floor frame is required to correctly construct your shed. BEGIN See page 9 for the preferred floor leveling method. Use level and check the frame is level before applying floor panels.
  • Page 16 10 x 12' FLOOR FRAME (Not Included) 3" (7,6 cm) Put both floor sections together and attach as shown using 3" nails. FINISH You have finished your floor frame. Proceed to level and square frame. (4) Nails per side, stagger pattern. Section 2 Section 1 140-5/8"...
  • Page 17 10 x 16' FLOOR FRAME (Not Included) 3" (7,6 cm) Put both floor sections together and attach as shown using 3" nails. FINISH You have finished your floor frame. Proceed to level and square frame. (4) Nails per side, stagger pattern. Section 2 Section 1 188-5/8"...
  • Page 18 10' x 8' FLOOR PANELS (Not Included) PARTS REQUIRED: 2" (5 cm) FLOOR PANELS NOT INCLUDED. SEE PAGE 8 FOR PANEL SIZES 48" x 92-5/8" AND QUANTITIES. (122 x 235,3 cm) Ensure your foor frame is square by installing (1) panel and squaring frame. BEGIN Install (1) 48 x 92-5/8"...
  • Page 19 10' x 8' FLOOR PANELS (Not Included) PARTS REQUIRED: 2" (5 cm) FLOOR PANELS NOT INCLUDED. SEE PAGE 8 FOR PANEL SIZES 48" x 92-5/8" 5/8 x 23-7/8 x 92-5/8" AND QUANTITIES. (122 x 235,3 cm) (1,6 x 61 x 235 cm) Continue installing panels with rough side up (painted grid lines).
  • Page 20 10' x 12' FLOOR PANELS (Not Included) PARTS REQUIRED: 2" (5 cm) FLOOR PANELS NOT INCLUDED. SEE PAGE 8 48" x 48" (122 x 122 cm) FOR PANEL SIZES AND QUANTITIES. BEGIN Install(1) 48" x 48" panel with the rough side up (painted-grid lines side) on Section 2 with the 48"...
  • Page 21 10' x 12' FLOOR PANELS (Not Included) PARTS REQUIRED: 2" (5 cm) FLOOR PANELS NOT INCLUDED. SEE PAGE 8 FOR PANEL SIZES 48" x 48" 5/8 x 23-7/8 x 48" AND QUANTITIES. (122 x 122 cm) (1,6 x 61 x 122 cm) Continue installing panels with rough side up (painted grid lines) as shown.
  • Page 22 10' x 16' FLOOR PANELS (Not Included) PARTS REQUIRED: 2" (5 cm) FLOOR PANELS NOT INCLUDED. SEE PAGE 8 FOR PANEL SIZES 48" x 96" (122 x 244 cm) AND QUANTITIES. BEGIN Position (1) 48" x 96" panel with the rough side up (painted-grid lines side) with the 96"...
  • Page 23 10' x 16' FLOOR PANELS (Not Included) PARTS REQUIRED: 2" (5 cm) FLOOR PANELS NOT INCLUDED. SEE PAGE 8 FOR PANEL SIZES 5/8 x 48 x 96" 5/8 x 23-7/8 x 96" AND QUANTITIES. (1,6 x 122 x 244 cm) (1,6 x 61 x 244 cm) Continue installing panels with rough side up (painted grid lines).
  • Page 24 IMPORTANT! I M P O R T A N T ! Check the foor frame is level after installing foor panels. Re-level if needed. • The foor should used as a stable work surface for wall construction. HINT: • Organize your assembly procedure during the build process to avoid over-handling of the walls.
  • Page 25 RAFTER ASSEMBLY JIG PARTS REQUIRED: 1-1/4" (3,2 cm) 1 x 3 x 7-1/2" (2,5 x 7,6 x 19 cm) ¸ BEGIN Build a Jig to ensure all Rafters are assembled the same. Mark a straight line on the Floor from corner to corner (Fig. A) or on sill plates to fit measurements (Fig.
  • Page 26 RAFTERS PARTS REQUIRED: 2" (5 cm) 6 x 24" (15 x 61 cm) x6/x10/x14 x6/x10/x14 2 x 4 x 65-7/8" (5 x 10 x 167 cm) ¸ BEGIN Place (2) rafter halves CV on floor jig. You will assemble (4) rafters. Secure gusset to rafter with 2"...
  • Page 27 BACK WALL FRAME PARTS REQUIRED: 3" (7,6 cm) 2 x 3 x 46-1/4" (5 x 7,6 x 117,5 cm) 2 x 3 x 77" (5 x 7,6 x 196 cm) 2 x 3 x 94-1/2" (5 x 7,6 x 240 cm) BEGIN Orient parts on edge on floor as shown.
  • Page 28 BACK WALL FRAME PARTS REQUIRED: 3" (7,6 cm) 2 x 3 x 46-1/4" (5 x 7,6 x 117,5 cm) Arrange parts on edge on floor as shown. Secure with (2) 3" screws at middle connection. FINISH Your back wall frame is now assembled. 48-3/4"...
  • Page 29 BACK WALL PANELS PARTS REQUIRED: 2" (5 cm) 3/8 x 48 x 84" (1 x 122 x 213,4 cm) 3/4" GAUGE BLOCK BEGIN Place LEFT panel on back frame as shown with primed side facing up. Use a 3/4" gauge block at edges of panel. Secure with 2"...
  • Page 30 BACK WALL PANELS PARTS REQUIRED: 2" (5 cm) 3/8 x 48 x 84" 3/4" GAUGE (1 x 122 x 213,4 cm) BLOCK Place RIGHT panel on back frame as shown with primed side facing up. Use a 3/4" gauge block at edges of panel. Secure with 2"...
  • Page 31 WING WALL PANELS PARTS REQUIRED: 1-1/4" (3 cm) RIGHT LEFT 2 x 3 x 72" (5 x 7,6 x 183 cm) You will assemble (2) RIGHT and (2) LEFT wing walls. BEGIN Place OY on floor. Place a wing wall panel primed side down onto OY (Fig.
  • Page 32 BACK WALL PANELS PARTS REQUIRED: 2" (5 cm) Pre-assembled LEFT Pre-assembled RIGHT Place wing wall assemblies on frame with bottom of panels flush. Secure wing wall assemblies to back wall frame with 2" nails spaced 6" apart. Do not nail in groove.
  • Page 33 RIGHT LEFT BEGIN Place left gable panel onto frame primed side up and flush to left panel. NOTE: Panel grooves will not align. Use a 3/4" gauge block at edge of panel. Secure with 2" nails along edge as shown.
  • Page 34 FRONT WALL FRAME PARTS REQUIRED: 3" (7,6 cm) 2 x 3 x 22-1/8" (5 x 7,6 x 56 cm) 2 x 3 x 77" (5 x 7,6 x 196 cm) 2 x 3 x 94-1/2" (5 x 7,6 x 240 cm) BEGIN Arrange (2) PB, (1) PR and (1) LT on edge on floor.
  • Page 35 FRONT WALL PANELS PARTS REQUIRED: 2" (5 cm) 3/4" GAUGE BLOCK BEGIN Place LEFT panel on front frame as shown with primed side up. Use a 3/4" gauge block on edges of panel. Secure panel to frame with 2" nails spaced 6" apart. Do not nail in groove.
  • Page 36 FRONT WALL PANELS PARTS REQUIRED: 2" (5 cm) 3/4" GAUGE BLOCK Place RIGHT panel on front frame primed side up. Use a 3/4" gauge block on edges of panel. Secure panel to frame with 2" nails spaced 6" apart. Do not nail in groove.
  • Page 37 FRONT WALL PANELS PARTS REQUIRED: 2" (5 cm) Pre-assembled LEFT Pre-assembled RIGHT Place wing wall panels onto frame with bottom of panels flush. Secure wing wall assemblies with 2" nails spaced 6" apart. Do not nail in groove. Primed Side UP 6"...
  • Page 38 SIDE WALL FRAMES PARTS REQUIRED: 3" (7,6 cm) 7/16 x 2-1/2 x 24-3/4" (1,1 x 6,4 x 62,9 cm) 2 x 3 x 69" (5 x 7,6 x 175 cm) 2 x 3 x 92-5/8" (5 x 7,6 x 235,3 cm) IMPORTANT! You will build (2) identical walls.
  • Page 39 10' x 8' SIDE WALL FRAME- SOFFIT PARTS REQUIRED: 1-1/4" (3,2 cm) 3/8 x 5 x 93-1/4" (0,9 x 12,7 x 236,9 cm) Place panel on 2 x 3 with primed side against 2 x 3 (Fig A) Keep panel fush along entire edge of 2 x 3 top plate (Fig A). Install soffit panel flush to 2 x 3 (Fig.
  • Page 40 10' x 8' SIDE WALL PANELS PARTS REQUIRED: 2" (5 cm) 3/4" GAUGE BLOCK 3/8 x 48 x 72" (1 x 122 x 183 cm) Ensure your wall frame is square by installing (1) panel and squaring frame. Place (1) 48 x 72" panel onto wall frame with primed side up as shown. Note the lip and square edges.
  • Page 41 10' x 8' SIDE WALL PANELS PARTS REQUIRED: 2" (5 cm) 3/8" x 48" x 72" (1 x 122 x 183 cm) Place 48" panel on frame as shown with primed side facing up. NOTE THE SQUARE AND LIP EDGES. Secure panel with 2"...
  • Page 42 10' x 12' SIDE WALL FRAMES PARTS REQUIRED: 3" (7,6 cm) 7/16 x 2-1/2 x 24-3/4" (1,1 x 6,4 x 62,9 cm) 7/16 x 2-1/2 x 48 (1,1 x 6,4 x 122 cm) 2 x 3 x 69" (5 x 7,6 x 175 cm) 2 x 3 x 48"...
  • Page 43 10' x 12' SIDE WALL FRAME- SOFFIT PARTS REQUIRED: 1-1/4" (3,2 cm) 3/8 x 5 x 48" (0,9 x 12,7 x 122 cm) 3/8 x 5 x 93-1/4" (0,9 x 12,7 x 236,9 cm) Place panels onto 2 x 3 with primed side against 2 x 3 as shown (Fig A) Keep panel fush along entire edge of 2 x 3 top plate (Fig A).
  • Page 44 10' x 12' SIDE WALL PANELS PARTS REQUIRED: 2" (5 cm) 3/4" GAUGE BLOCK 3/8 x 48 x 72" (1 x 122 x 183 cm) Ensure your wall frame is square by installing (1) panel and squaring frame. Install (1) 48" x 72" panel onto wall frame with primed side up as shown. Note the lip and square edges.
  • Page 45 10' x 12' SIDE WALL PANELS PARTS REQUIRED: x148 2" (5 cm) 3/8" x 48" x 72" (1 x 122 x 183 cm) Place(2) 48"x 72" panels flush to installed panels, as shown. NOTE THE SQUARE AND LIP EDGES. Secure with 2" nails spaced 6" apart on edges and 12" apart inside panel. Do not nail in groove.
  • Page 46 10' x 16' SIDE WALL FRAMES PARTS REQUIRED: 3" (7,6 cm) 7/16 x 2-1/2 x 24-3/4" (1,1 x 6,4 x 62,9 cm) 7/16 x 2-1/2 x 48" (1,1 x 6,4 x 122 cm) 2 x 3 x 69" (5 x 7,6 x 175 cm) 2 x 3 x 48"...
  • Page 47 10' x 16' SIDE WALL FRAME- SOFFIT PARTS REQUIRED: 1-1/4" (3,2 cm) 3/8 x 5 x 48" (0,9 x 12,7 x 122 cm) 3/8 x 5 x 93-1/4" (0,9 x 12,7 x 236,9 cm) Place panels onto 2 x 3 with primed side against 2 x 3 as shown (Fig A) Keep panel fush along entire edge of 2 x 3 top plate (Fig A).
  • Page 48 10' x 16' SIDE WALL PANELS PARTS REQUIRED: 2" (5 cm) 3/4" GAUGE BLOCK 3/8 x 48 x 72" (1 x 122 x 183 cm) Ensure your wall frame is square by installing (1) panel and squaring frame. Place the 48 x 72" panel onto wall frame with primed side up. Note the lip and square edges.
  • Page 49 10' x 16 ' SIDE WALL PANELS PARTS REQUIRED: x238 2" (5 cm) 3/8" x 48" x 72" (1 x 122 x 183 cm) Place additional 48"x72" panels on frame flush to installed panels. NOTE THE SQUARE AND LIP EDGES. Secure panels with 2"...

  • Page 50: Back Wall Installation

    BACK WALL INSTALLATION PARTS REQUIRED (TEMPORARY): 3" (7,6 cm) 1-1/4 x 2-1/2 x 69" (3,2 x 7,6 x 175,3 cm) 2" (5 cm) BEGIN Center back wall assembly on the 120" (305 cm) floor dimension. Use OO as a temporary brace. Secure with (2) 3" screws. 3"...
  • Page 51 SIDE WALLS INSTALLATION x4/8/12 3" (7,6 cm) 3" (7,6 cm) x30/39/48 2" (5 cm) Additional fasteners needed for 10' x 12' kit or 10' x 16' kit. Same instructions apply. BEGIN Stand right side wall on floor. It is important to secure the side wall in the following order: Soffit Center side wall on floor front to back.
  • Page 52 FRONT WALL INSTALLATION 3" (7,6 cm) 2" (5 cm) BEGIN Center front wall on floor side-to-side. Soffit 3/8" (0,9 cm) OVERLAP Panel The side wall soffit will overlap the front Trim Panel wall 3/8" (Fig. A). Fig. A Nail the front wall flush to the floor using 2"...
  • Page 53 GABLE TRIM PARTS REQUIRED: 1-1/4" (3 cm) 2 x 3 x 58" (5 x 7,6 x 147,3 cm) ¸ BEGIN Position (1) CDD flush to front panel edge and center on right edge of groove (Fig. A). Install trim with (8) 1-1/4" screws from inside.
  • Page 54 PARTS REQUIRED: 3/4" (1,9 cm) x11 11/16 x 2-1/2 x 60-5/8" (1,7 x 6,3 x 154 cm) ¸ BEGIN Clamp or hold trim XMA onto gable panel seam and up against gable trim. Ensure XMA is level. GABLE TRIM SEAM Flush...
  • Page 55 TRIM / ENDCAPS PARTS REQUIRED: 1-1/4" (3,2 cm) 1 x 3 x 7-1/2" (2,5 x 7,6 x 19 cm) RIGHT PAINTED RED 3/4 x 5-1/8 x 8-3/8" (1,9 x 13 x 21,3 cm) LEFT PAINTED GREEN ¸ BEGIN Assemble GBB to endcaps with 1-1/4" screws, as shown. Repeat steps to build (2) more endcaps.
  • Page 56 RAFTERS PARTS REQUIRED: 3" (7,6 cm) pre-assembled 2" (5 cm) ¸ BEGIN Locate rafters directly over studs and flush to overhang in wall frame (Fig. A). Check that you have the measurements shown. Screw through soffit panel into rafters with (1) 2" screw (Fig. A). Secure with (2) 3"...
  • Page 57 Fig. C panel side-to-side until the top corner is flush to the peak (Fig. C) and there is 1/8" measurement to the gable trim (Fig. D). You may need to move your back wall to get the 1/8" measurement. Secure panel with 2" nails in the corners.
  • Page 58 6" (15 cm) Install the lower roof panels flush to the upper panels and with a 1/8" Fig. F measurement at the gable trim (Fig.G). Nail the roof panel using 2" nails spaced 6" apart on edges and 12" apart inside panel.
  • Page 59 TRIM PARTS REQUIRED: 2" (5 cm) 1 x 3 x 94-3/4" (2,5 x 7,6 x 240,6 cm) ¸ BEGIN Install fascia trim flush under roof panel (Fig. A) and endcaps at ends of rafters (Fig. B). Secure with 2" nails, as shown. Repeat steps to install fascia trim on both sides.
  • Page 60 DOORS PARTS REQUIRED: 1-1/4" (3 cm) 1-1/4 x 2-1/2 x 69" (3,2 x 7,6 x 175,3 cm) 2" (5 cm) HINT: Look for 3/8" SPACER 3" (7,6 cm) attached to doors. 5/8 x 3 x 72" (1,6 x 7,6 x 183 cm) Left Door Right Door BEGIN...
  • Page 61 DOORS PARTS REQUIRED: 3" (7,6 cm) 1-1/4 x 2-1/2 x 69" (3,2 x 7,6 x 175,3 cm) Install temporary support OO as a ledger board flush under wall panels with (2) 3" screws (Fig. A). Flush against wall panels. Fig. A Center doors on right edge of groove as shown (Fig.
  • Page 62 DOOR PARTS REQUIRED: 2" (5 cm) x8 3/4" (1,9 cm) x52 5/8 x 3 x 72" (1,6 x 7,6 x 183 cm) 64" Metal Threshold BEGIN Secure hinge boards from inside using 3/4" screws as shown (Fig. A). Reinforce the door trim using 3/4" screws through door panel into trim (Fig. A). Locate screws as shown in Fig.
  • Page 63 DOOR WEATHERSTRIP PARTS REQUIRED: 2" (5 cm) 1-1/4 x 2-1/2 x 69" (3,2 x 7,6 x 175,3 cm) BEGIN With left door closed, center a weatherstrip OO vertically on the left door in the door opening (Fig. A). OO will offset the left door 1" OUT past the door trim 1"...

  • Page 64: Door Hardware

    DOOR HARDWARE PARTS REQUIRED: 3/8" (9 mm) Drill Bit 3/4" (1,9 cm) 3/4" (1,9 cm) BEGIN Install barrel bolt flush at top of OO on left door. Secure with 3/4" screws as shown (Fig A). With door closed mark hole location for bolt to extend into. HINT: Extend bolt to leave a mark in wood.
  • Page 65 PARTS REQUIRED: 3/4" (19 mm) DOOR TRIM 5/8 x 3 x 14" (1,6 x 7,6 x 35,5 cm) PARTS REQUIRED: 3/4" (1,9 cm) BEGIN Position parts on lower pane of Door Panel, as shown. 5/8 x 4 x 14" (1,6 x 10 x 35,6 cm) Attach each using two 3/4"...
  • Page 66 - NOT INCLUDED - • Install over roof felt or over roof felt on gable side and under roof felt on eave side (Fig. A). • Do not use nails on side of drip edge that hangs over side of building.
  • Page 67 SHINGLES - NOT INCLUDED - • Follow directions provided by manufacturer and these instructions. Familiarize yourself with a 3-Tab Shingle. Notch Notch SHINGLE NAIL PATTERN 1/2 " 1" Sealing Str (1,3 cm) 1" (2,5 cm) (2,5 cm) Half A Rain Slot Full Rain Slot NAILS NEVER DRIVE FASTENERS INTO OR ABOVE SEALING STRIPS.
  • Page 68 SHINGLES continued... Beginning at front of shed, install first row of shingles with notch at 1" past roof edge or flush with drip edge. Roof Deck FRONT OF BACK OF SHED SHED 1" (2,5 cm) Flush with starter row. Notch - or - Drip Edge Flush with starter row.
  • Page 69 SHINGLES continued... Continue installing rows of shingles to the peak. At the peak make sure there is a maximum of 5" or less to the rain slot, as shown below. If shingles overlap at ridge cut to peak with a utility knife. 5"...
  • Page 70 SHINGLES - RIDGE CAP • You will finish off the top of the roof with a ridge cap made from shingles. BEGIN Hint: Use cut-off pieces first. Cut shingles into (3) pieces. 2" 2" (5 cm) (5 cm 2" 2" 2"...
  • Page 71 SHINGLES - RIDGE CAP continued... Continue installing ridge cap to back of roof. Make sure there is 4" between the shingle-color and edge of shingles. 4" (10 cm) Trim cap off fush to shingles When you have 4" minimum of shingle color cut (1) piece to cap your roof. Cut at top of rain slot.
  • Page 72 LIMITED CONDITIONAL WARRANTY* Backyard Storage Solutions, LLC warrants the following: Every product is warranted from defects in workmanship and manufacturing for 1 year. All accessories, hardware and metal components are warranted for 2 years. All Oriented Strand Board (OSB) is warranted for 2 years Siding and Trim is warranted for 10 years.