Chengdu Ebyte Electronic Technology Co., Ltd
System wake up
Sleep mode
7.4
Command list
7.4.1 AT test command
command
7.4.2 AT+RESET Reset command
command
AT+RESET
7.4.3 AT+RESTORE restore factory setting
command
AT+RESTORE
Remark:
1、
after the reset, automatically restart;
2、
During the process of restoring the factory settings, any form of reset is prohibited, must not power off before it is
completed.;
7.4.4 AT+BAUD baud rate
Inquire
Set
Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd
Status printing list
AT
Remark:None
Remark:take into effect immediately
command
AT+BAUD?
AT+BAUD=[para]
E104-BT5032A User Manual
\r\nSTA:wakeup\r\n
\r\nSTA:sleep\r\n
respond
+OK
respond
+OK
respond
OK
respond
+OK=[para]
+OK:success
+ERR=[NUM]:error
23