Page 1
User Manual V2.0 Preface Congratulations on choosing Mictrack MP91 4G OBD GPS tracker. This manual shows how to easily program and setup the tracker for best results. Make sure to read this manual carefully before using this product, so as to avoid delays or confusion with it’s operation.
MP91 User Manual V2.0 1. Overview The MP91 is a plug-and-play 4G OBD tracker without wiring. Easy install to any vehicle with a standard OBD II connector. It can be used locate, track and monitor the vehicle via SMS, PC Computer or Mobile APP. It is commonly used to track and locate individual vehicles, the user also can real time tracking and check the historical route travelled.
MP91 User Manual V2.0 5.2 Install the Device 5.2.1 Find the OBD Port: The OBD port is usually located under the dashboard, beneath the steering wheel column (1 - 3 in the diagram below). Note If not located beneath the steering column, look for the port in the areas indicated by numbers 4 - 9.
MP91 User Manual V2.0 6. Setup and Configuration Following a successful command, you should always receive a reply SMS from the unit. Be patient, as this may take some time depending if the unit is required to reboot to process the command.
MP91 User Manual V2.0 Reply: OK Enable phone alarm for shake: 122# Reply: OK 6.7 SMS Alarm for shake Disable SMS alarm for shake : 126# Reply: OK Enable SMS alarm for shake : 125# Reply: OK 6.8 Set APN (Access Point Name)
MP91 User Manual V2.0 7. PC Tracking platform 7.1 App install & Login Search “iottracking” in Google Play or iOS store(or scan the following QR code) to download the Mobile APP; Choose the” Login by ID; Input your device’s ID number...
Page 9
MP91 User Manual V2.0 1>Data only SIM card and don't Please check the SIM card supported SMS service, status and make sure it 2>New SIM card have not active can work. 3>Card balance is not enough Please check the command...
Need help?
Do you have a question about the MP91 and is the answer not in the manual?
Questions and answers