Daikin Home Controls EKRRVATR2BA User Reference Manual page 17

To connect the DHC Radiator Thermostat to the DHC
Access Point, proceed as follows:
1. Open the ONECTA app.
2. Click on the plus symbol (+).
3. Select the menu item Add Daikin Home Controls.
4. Select Add DHC Accessory.
5. Open the battery compartment (B) by pulling the
cover down (see figure 3).
6. Remove the insulation strip from the battery com-
partment.
» Connection mode remains activated for 3 minutes
(see figure 4).
You can manually start the connection mode for
another 3 minutes by pressing the system button
(D) shortly (see figure 4).
7. Follow the instructions in the app.
Start-up
17