Automatic Mode; Manual Mode; Offset Temperature (Not Yet Available) - Daikin Home Controls EKRRVATR2BA User Reference Manual

Radiator thermostat

Table of Contents

6.1

Automatic mode

In automatic mode, the temperature is controlled in ac-

cordance with the set heating schedule. Manual changes

are activated until the next point at which the schedule

changes. Afterwards, the defined schedule will be activated

again.

6.2

In manual mode, the temperature is controlled in accor-

dance with the current temperature set via the push-but-

tons (E + F). The temperature remains activated until the

next manual change.

6.3

As the temperature is measured on the DHC Radiator

Thermostat, the temperature distribution can vary through-

out a room. To adjust this, a temperature offset of ±3.5 °C

can be set. If a nominal temperature of e.g. 20 °C is set

but the room presents with only 18 °C, an offset of -2.0 °C

needs to be set.

This setting is not yet available in the ONECTA app

and cannot be changed for the moment.

Configuration

Table of Contents

Do you have a question about the Home Controls EKRRVATR2BA and is the answer not in the manual?