(the port must then be switched to RS-485 functionality). This allows a dedicated line star
network to be connected to the X1 connector. For more detailed information, refer to the
sections with the network examples.
The following figures show how the connecting cables listed above are assembled.
Figure 5-18
Figure 5-19
SINAUT ST7 Station control system - System Manual
System Manual, 05/2007, C79000-G8976-C178-06
Assembly of the standard connecting cable 6NH7701-4AL
Assembly of the standard connecting cable 6NH7701-4DL
Installing and putting a TIM into operation
5.3 Design of the TIM 3 and TIM 4 modules
173