Sullair LS-25S-257KW Operator's Manual And Parts List page 17

Section 2
DESCRIPTION
Figure 2 ---5 Supervisor II Panel
S Continuous --- Starts machine if no alarm
conditions are present. Also used to clear
alarm conditions while machine is running.
S Auto --- Starts machine and selects auto
mode if no alarm conditions are present.
Also used to clear alarm conditions while
machine is running.
S Display --- Used to display pressures,
temperatures and other status information
(See section on STATUS DISPLAYS).
12
I
DSP
Logo --- Used for various functions de-
S
scribed in later sections
S Program --- Used to enter the parameter
change mode where control parameters
may be displayed and changed (See PA-
RAMETER SETUP).
PRG
Up arrow --- Used in status displays to
S
change displays and in parameter setup
mode to increment a value.
S Down arrow, lamp test --- Used in status
displays to change displays and in param-