Advantech USB-4716 Startup Manual

USB-4716
200kS/s, 16-bit Multifunction USB Module
Startup Manual
Packing List
Before installation, please make sure that you have re-
ceived the following:
1. USB-4716 USB Module x 1
2. Shielded USB 3.0 Cable (1m) x 1
3. DIN-rail mounting kit x 1
4. Startup Manual
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
User Manual
Please refer to Advantech support portal for the manual.
https://www.advantech.com/support
User Manual
FCC Class A
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in
a residential area is likely to cause interference in which
case the user is required to correct interference at his own
expense.
CE
This product has passed the CE test for environmental
specifications when shielded cables are used for external
wiring. We recommend the use of shielded cables. This kind
of cable is available from Advantech. Please contact your
local supplier for ordering information.
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
For technical support and service, please visit our
support website at:
http://support.advantech.com
This manual is for the USB-4716.
Part No. 2003471611
Printed in Taiwan
2nd Edition
September 2021
Overview
USB-4716 is a 16-bit multifunction module with 200kS/s
maximum sampling rate. It provides 16 single-ended/8
differential AI channels along with 2 AO channels. It also
offers 8 TTL DI/O channels for on-off control applications.
Besides, one 16-bit counter channel is available onboard.
Specifications
Analog Input
Channels 16-ch single-ended/ 8-ch differential
Resolution 16 bits FIFO Size
Sampling Rate
200 kS/s
Gain
Input
Gain Code
Range and
Bipolar (V)
Gain List
Unipolar (V)
Gain
Drift
Zero (µV/° C)
Gain (ppm/° C) 30 30
Small Gain
Signal
Bandwidth
Bandwidth
for PGA (MHz)
Input
30 V max.
Protection
Input
1GW
Impedance
Input Comm.
Mode Voltage 11V
INLE
DNLE
DC
Gain
Gain Error
Accuracy
(% of FSR )
SINAD
AC
THD
ENOB
Channels
2
Resolution 16 bits
Throughput 2 kHz
Operating Mode Single output
Output Range
0~5, 0~10, ±5, ±10 V
Accuracy DC
Slew Rate
Dynamic
Performance
Settling Time
Driving Capability 5 mA
Output Impedance 0.1W max.
1024 Samples
0.5 1 2 4
4 0 1 2
±10 ±5 ±2.5 ±1.25 ±0.625
N/A 0~10 0~5 0~2.5 0~1.25
0.5 1 2 4
±30
30 30
0.5 1 2 4
1.1 1.1 1.1 1.1
1LSB
3LSB
0.5 1 2 4
0.015 0.03 0.03 0.05 0.1
83 dB
-88 dB
13.5 bit
FIFO Size
INLE
DNLE
0.125 V/µs
150 µs (to ±1/2
USB-4716 Startup Manual 1
LSB of FSB)
8
3
8
30
8
1.1
8
N/A
±2LSB
±1LSB