Advantech PCA-6010 User Manual page 45

! Onboard Parallel Port
This field sets the address of the on-board parallel port connector. You can
select "378/IRQ7", "278/IRQ5", "3BC/IRQ7", or "Disabled". If you install an I/O
card with a parallel port, make sure there is no conflict in the address assign-
ments. The single board computer can support up to three parallel ports.
! Parallel Port Mode
This field allows you to set the operation mode of the parallel port. The setting
"Normal" allows normal speed operation, but in one direction only. "EPP" allows
bi-directional parallel port operation at maximum speed. "ECP" allows the paral-
lel port to operate in bi-directional mode and at a speed faster than the maxi-
mum data transfer rate. "ECP + EPP" allows normal speed operation in a two-
way mode.
! EPP Mode Select
This field allows you to select EPP port type 1.7 or 1.9. The choices are
"EPP1.9" and "EPP1.7".
! ECP Mode Use DMA
This selection is available only if you select "ECP" or "ECP + EPP" in the Paral-
lel Port Mode field. In ECP Mode, you can select DMA channel 1 or DMA chan-
nel 3. Leave this field on the default setting.
! Onboard Serial Port 3 (Optional)
The settings are "CA0", CA8" and "Disabled" for the on-board serial connector
3.
Series port 3 use IRQ
!
The settings are "IRQ10", "IRQ11" and "Disabled" for the on-board serial con-
nector 3.
! Onboard Serial Port 4 (Optional)
The settings are "CA0", CA8" and "Disabled" for the on-board serial connector
4.
! Series port 4 use IRQ
The settings are "IRQ10", "IRQ11" and "Disabled" for the on-board serial con-
nector 4.
! Onboard Serial Port 5 (Optional)
The settings are "CA0", "CA8" and "Disabled" for the on-board serial connector
5.
! Series port 5 use IRQ
The settings are "IRQ10", "IRQ11" and "Disabled" for the on-board serial con-
nector 5.
! Onboard Serial Port 6 (Optional)
The settings are "CA0", "CA8" and "Disabled" for the on-board serial connector
6.
! Series port 6 use IRQ
The settings are "IRQ10", "IRQ11" and "Disabled" for the on-board serial con-
nector 6.
35 PCA-6010 User Manual