Advantech PCA-6010 User Manual page 43

! On-Chip Serial ATA
Choose the status of serial ATA. The default setting is "Auto" which lets the sys-
tem arrange all parallel and serial ATA resources automatically. The "Disabled"
setting disables the SATA controller. The "Combined Mode" combines PATA and
SATA, and maximum of 2 IDE drives in each channel. The "Enhanced Mode"
enables both SATA and PATA, and a maximum of 6 IDE drives are supported.
The "SATA Only" setting means SATA is operating in legacy mode.
! USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) controller
and you have USB peripherals. The choices are "Enabled" and "Disabled".
! USB 2.0 Controller
This entry is to disable/enable the USB 2.0 controller only. The BIOS itself may/
may not have high-speed USB support. If the BIOS has high speed USB sup-
port built in, the support will automatically turn on when a high speed device is
attached. The choices are "Enabled" or "Disabled".
! USB Keyboard / Mouse Support
Select Enabled if you plan to use an USB keyboard. The choices are "Enabled"
and "Disabled".
! Azalia Audio Select
Select "Disable" if you do not want to use audio.
! Onboard LAN1 Control
Options are "Enabled" and "Disabled". Select "Disabled" if you don't want to use
onboard LAN controller1.
! Onboard LAN2 Control (Optional)
Options are "Enabled" and "Disabled". Select Disabled if you don't want to use
the onboard LAN controller2.
Figure 3.8 Onboard device
33 PCA-6010 User Manual