• Do not operate this fixture if the power cord has been damaged. Turn off fixture and replace with a power cord of similar rating. Service & Support Your ColorKey product includes a 2-year warranty. For technical support or to register your https://www.colorkeyled.com/support/ product, please visit...
Introduction Thank you for purchasing the ColorKey AirPad QUAD! The AirPad is part of the ColorKey Air Series, an ecosystem of battery-powered, wireless DMX lighting fixtures, with a wireless DMX hub for greater control and connectivity options. DOWN ENTER AIRPAR COB...
Power & Charging The AirPad QUAD features a rechargeable lithium-ion battery for wire free use. The battery can power the light for up to 20 hours from a full charge. An adaptive power supply with an input voltage range of 100 to 240 VAC 50/60Hz is also included.
Display Operation IR Sensor Wireless Group ID Select Wireless On/Off Scroll Up/Down Enter ESC: Navigate to the previous higher-level menu item. Down: Scrolls through the menu items and numbers in descending order. Scrolls through the menu items and numbers in ascending order Enter: Is used to select and confirm/store the current menu selection Wireless:...
Menu Wireless DMX Status Battery Life Indicator Temperature Indicates DMX is Connected DMX Address Wireless Group ID Menu Guide Set DMX Address (001 to 512) Set DMX Channel Mode (3, 4, 6, or 9 channels) Slave Set light to Slave or Master Auto Activate Auto mode and adjust speed (1-15) Fade...
Infrared (IR) Remote Control To use the IR remote, simply point the remote at the IR receiver on the lighting fixture. The IR receiver on the AirPad QUAD is located just above the LED on the top panel. Black Out Black Out mode instantly turns all LED’s off.
Page 9
Auto In Auto mode, the light loops through various preprogrammed colors. To turn on Auto mode, press the Auto button, then press (+) or (-) to increase or decrease the speed of the program. Strobe In Strobe mode, the light will flash at the desired rate. To turn on Strobe mode, press the Strobe button, then press (+) or (-) to increase or decrease the strobing rate.
DMX Values 3 channel mode Channel Value Function 000-255 000-255 Saturation 000-255 Value 4 channel mode Channel Value Function 000-255 000-255 Green 000-255 Blue 000-255 White 6 channel mode Channel Value Function 000-255 Master Dimmer 000-255 000-255 Green 000-255 Blue 000-255 White 000-255...
QUAD QUAD The AirPad QUAD include an integrated W-DMX transceiver for instant wireless connectivity. This enables the AirPad to wirelessly control any Air Series fixture in the same wireless group. To achieve this, simply set an AirPad to Master and all other fixtures to Slave.
Page 12
To make a connection, simply set the AirHub and AirPad QUAD to the same group ID. Both units are set to ID01 in the example below. AIRPAD AIRPAD AIRPAD QUAD QUAD QUAD DOWN ENTER AirHub DMX Menu AirPad QUAD Menu...
Troubleshooting Problem Solutions • Confirm the Wireless Group ID is the same as the transmitter • Make sure the fixture is in DMX mode No DMX control • Make sure wireless is enabled on your AirPad Fixture does not • Make sure the fixture is in Sound Active mode. respond to sound •...
Need help?
Do you have a question about the AIRPAD QUAD and is the answer not in the manual?
Questions and answers