Page 2
Introduction Thank you for purchasing the ColorKey PartyBar GO. Please read these instructions carefully before use. O perating this fixture according to these instructions is important to avoid any possible damage or accidents caused by misuse. Packing list 1x PartyBar GO ...
Display Operation MENU: Access the menu/Scroll through menu options UP: Scroll up through menu selections or increase parameters DOWN: Scroll down through menu selections or dec parameters ENTER: Open/Select the current menu option...
Troubleshooting Problem Solutions Make sure that the DMX cable is properly connected Make sure that the DMX controller is operational No DMX control Check the DMX cable for tears or breaks Make sure that the fixture is in DMX mode Fixture does not ...
Fuse: F3A 250V Product size: 200 x 750 x 165 mm Net Weight: 5.7 kgs Notice to consumer: ColorKey offers a 2-year limited warranty. Please visit our website at www.ColorKeyLED.com to register your product. Please note: As we continue to work towards improving our products and your experience...
Page 14
PARTYBAR SETUP INSTRUCTIONS PLEASE READ CAREFULLY BEFORE USING THE STAND TO AVOID DAMAGE AND INJURY The PartyBar tripod stand includes a removable extension pole, which has the advantage of shrinking the footprint of the stand when disassembled, for ease of transportation. With the extension pole installed, the stand can lift your xtures over 7ft in the air.
Need help?
Do you have a question about the PartyBar GO and is the answer not in the manual?
Questions and answers