Network Connection; Lan; Access Through Xcel Ip Utility - Nuvico Xcel NCT-5MLC User Manual

Network Camera User Manual

2 Network Connection

You may connect the IP camera via LAN or WAN. The details are as follows:

2.1 LAN

In LAN, there are two ways to access the IP camera: 1. Access through Xcel IP Utlity
2. Direct accessthrough web browser.

2.1.1 Access through Xcel IP Utility

Network connection:
① Make sure the PC and IP camera are connected to the local network and the Xcel IP Utility
is installed in the PC, downloadable from nuvico.com
② Double click the Xcel IP Utility icon on the desktop to run this software as shown below:
③ Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the
information of the camera listed in the above table to show the network information on the
right hand. Modify the IP address and gateway of the camera and make sure its
network address is in the same local network segment as the computer. Please modify the IP
address of your device according to the practical situation.
2