Server Configuration; Ddns - Nuvico Xcel NCT-5MLC User Manual

Network Camera User Manual

4.5.3 Server Configuration

This function is mainly used for connecting network video management system.
1. Check "Enable".
2. Check the IP address and port of the transfer media server in the ECMS/NVMS. Then
enable the auto report in the ECMS/NVMS when adding a new device. Next, enter the
remaining information of the device in the ECMS/NVMS. After that, the system will
automatically allot a device ID. Please check it in the ECMS/NVMS.
3. Enter the above-mentioned server address, server port and device ID in the corresponding
boxes. Click the "Save" button to save the settings.

4.5.4 DDNS

If the camera is set up with a DHCP connection, DDNS should be set for the internet.
1. Go to ConfigNetwork DDNS.
2. Apply for a domain name. Enter www.xcelddns.com in the browser web address bar to visit
the website. Then click the "Registration" button.
33