Table of Contents
Advertisement
GD-24GS pressure reducing valve for water (Hereinafter so called pressure reducing valve) is an
all-purpose valve suitable for various applications, such as water supply systems of general
residential housing, high-rise buildings, industrial plants, and factory equipment. It can also be used
to provide stable water pressure in high-rise apartment units, and for hilly areas where each house
requires an individual water supply system. High durability is achieved through the use of a
stainless steel valve seat and a suspension type clamp in the drive mechanism.
1. Specifications
Model
Nominal size
Application (Fluid)
Inlet pressure
Reduced pressure
Min. differential pressure
Max. pressure reducing ratio
Temperature
Body
Valve (Disc)
Valve Seat
Diaphragm
Connection
*GD-24GS is a set of pressure reducing valve (GD-24), pressure gauge, and strainer (SY-24).
*The pressure gauge and strainer are included with the product, so attach them to the pressure
reducing valve when installing the piping on site.
*The Screen of strainer is 60 mesh (standard mesh).
*The Pressure gauge connection size is R 1/8.
*The accuracy of the pressure gauge is ±3.0%F.S.
*The valve can be mounted in horizontally and vertically.
(*) Avoid continuous use at 70 ℃.
Caution
Please collate with attached label or plate and specification of ordered model.
*Please consult factory in case they do not match each other.
GD-24GS
15～50A
Hot or cold water
0.2～1.6MPa
0.05～0.55MPa
0.05MPa
10: 1
5～80℃ (*)
Bronze
Urethane rubber
Stainless steel
NBR
JIS Rc
-1-
■ EPDT-175d■
Advertisement
Table of Contents
