Specifications - Yoshitake AF-10EN Product Manual

Model
Structure
Nominal size
Application
Working pressure
Max. temperature
Material Spring chamber
Valve and Valve seat
Connection
1
*
: The structure in which the fluid is discharged from the outlet and other parts.
2
*
: The max. set pressure and the max. temperature are according to the PT rating. Please see below.
Temperature (°C)
Max.set pressure(MPa)
Note: Intermediate values may be obtained by linear interpolation.
1. Please do not use this product for equipment or device which does not allow the valve seat leakage.
* The product has valve seat leakage within the allowable value, and it cannot be fully closed. The valve
seat leakage cannot be zero.
2. Do not use the product for equipment or device which vibrates excessively.
* Failure to follow this notice may result in malfunction.
3. Do not adjust or change the set pressure.
* Failure to follow this notice may result in damage to the equipment.
4. Please confirm that the indications on the product correspond with the specifications of the ordered
product model before use.
* If they are different, please contact us without using the product.

1. Specifications

Body
Pressure-Temperature Rating
-10 to 120
1.6
Temperature and max. set pressure
AF-10EN
Open type with lever
20A-100A
Steam, Air, Other non-dangerous gases
0.1-1.6 MPa
250 °C
Ductile cast iron
Ductile cast iron
Stainless steel
EN PN16 flanged
(Outlet is two sizes larger than inlet.)
PN16
150
1.55
Temperature (°C)
Caution
1
*1
*2
*2
*2
200 250
1.47 1.39
■EPDT-395■