ESAB Aristo Origo Arc 4001i Service Manual page 46

Test box TB 1
Ordering no. 0460 868 880
To be used for in-service inspection and testing.
CAN splitter adapter box
Ordering no. 0460 772 880
To be used when external equipment and ESAT has to be connected to the remote
connection. The box is equipped with:
S
One 10 pole cable plug
S
One 12 pole cable plug
S
Two 12 pole panel sockets
S
One 10 pole panel socket
Antistatic service kit
Ordering no. 0740 511 001
The kit makes it easier to protect sensitve
components from electrostatic discharge.
Contents:
S
A conductive mat (size 610 x 610 mm)
S
A 1.5 metre long ground cable with a
crocodile clip
S
An adjustable wrist strap and cable with
an inbuilt protective resistor
ESAT service kit
The software update is made from a PC, it has to be managed by a trained serviceman. For
this a PC program called ESAT, ESAB Software Administration Tool, is needed. The PC is
connected to the welding equipment by a cable connector and a CAN reader. From the
ESAT it is possible to update the software. ESAT also contains service functions by which it
is possible to control, change or read the different functions of the equipment.
For the installation and use of the ESAT you need a PC with operating system Windows.
The ESAT service kit contents:
S
CAN adapter with connection cables
S
CD with software
S
Instruction manual for ESAT
Ordering no:
0458 847 880 PPCAN for connection to the print port of the PC
0458 847 881 USB2CAN for connection to the USB port of the PC
ca42f2
Antistatic service kit
- 46 -
S0740 800 197/E100621/P74