Bearing Navigation - Suunto 9 PEAK PRO User Manual

Suunto 9 Peak Pro
If you stray too far off from the route while using altitude navigation, your watch will give you
an Off route message in the altitude profile display. If you see this message, scroll to the
route navigation display to get back on track before continuing with altitude navigation.

5.2. Bearing navigation

Bearing navigation is a feature that you can use outdoors to follow the target path for a
location you see or have looked at from map ahead. You can use this feature stand alone as a
compass or together with a paper map.
If you set the target distance and altitude while setting the direction, your watch can be used
to navigate to that target location.
To use bearing navigation during an exercise (only available for outdoor activities):
1. Before you start an exercise recording, swipe up or press the lower button and select
Navigation.
2. Select Bearing.
3. If needed, calibrate the compass by following the on-screen instructions.
4. Point the blue arrow on the screen towards your target location and press the middle
button.
5. If you do not know the distance and altitude to the location, select No.
6. Press the middle button to acknowledge the set bearing.
7. If you know the distance and altitude to the location, select Yes.
8. Enter the distance and altitude to the location.
9. Press middle button to acknowledge the set bearing.
To use bearing navigation without exercising:
1. Scroll to Navigation by swiping up or pressing the lower button from watch face.
2. From the bottom of the navigation display, swipe up or press the lower button.
3. Select Bearing navigation.
4. If needed, calibrate the compass by following the on-screen instructions.
5. Point the blue arrow on the screen towards your target location and press the middle
button.
6. If you do not know the distance and altitude to the location, select No and follow the blue
arrow to the location.
7. If you do know the distance and altitude to the location, select Yes.
8. Enter the distance and altitude to the location and follow the blue arrow to the location.
The display will also show the distance and altitude left to the location.
9. Set a new bearing by swiping up or by pressing the lower button.
36