Power Saving; Pairing Pods And Sensors - Suunto 9 PEAK PRO User Manual

Suunto 9 Peak Pro
The moon phase is available as a view in the outdoor style watch face. Tap on the screen to
change the lower row until you see the moon icon and percentage.
The phases are presented as a moon icon followed by the percentage.

3.10. Power saving

Your watch includes a power saving option that turns off all vibration, daily HR and Bluetooth
notifications to extend battery life during normal daily use. For power saving options while
recording activities, see 4.4. Battery power management.
Enable/disable power saving from the settings under General » Power saving.
NOTE: Power saving is automatically enabled when the battery level reaches 10%.

3.11. Pairing pods and sensors

Pair your watch with Bluetooth Smart pods and sensors to collect additional information, such
as cycling power, when recording an exercise.
Suunto 9 Peak Pro supports the following types of pods and sensors:
Heart rate
•
Bike
•
Power
•
• Foot
NOTE: You cannot pair anything if airplane mode is on. Turn off airplane mode before
pairing. See 3.5. Airplane mode.
To pair a pod or sensor:
1. Go to your watch settings and select Connectivity.
2. Select Pair sensor to get the list of sensor types.
3. Swipe down to see the whole list and tap on the sensor type you want to pair.
4. Follow the instructions in the watch to complete pairing (refer to sensor or pod manual if
needed), press the middle button to advance to the next step.
15