Navigating To A Poi - Suunto 9 PEAK PRO User Manual

Suunto 9 Peak Pro
2. From the bottom of the navigation display, swipe up or press the lower button.
3. Select POIs and press the middle button.
4. Scroll to the POI you want to remove from the watch and press the middle button.
5. Scroll to the end of the details and select Delete.
When you delete a POI from your watch, the POI is not permanently deleted.
To permanently delete a POI, you need to delete the POI in Suunto app.

5.5.2. Navigating to a POI

You can navigate to any POI that is in your watch POI list.
NOTE: When navigating to a POI, your watch uses full power GPS.
To navigate to a POI:
1. Swipe up or press the lower button and select Navigation.
2. From the bottom of the navigation display, swipe up or press the lower button.
3. Select POIs and press the middle button.
4. Scroll to the POI you want to navigate to and press the middle button.
5. Select Start exercise if you want to use the POI for exercising or select Navigate only if
you only want to navigate to the POI.
NOTE: If you only navigate to the POI, nothing will be saved or logged in Suunto app.
6. Press the upper button again at any time to stop navigating.
The POI navigation has two views:
POI view with direction indicator and distance to the POI
•
map view showing your current location relative to the POI and your breadcrumb trail (the
•
track you have traveled)
Swipe left or right, or press the middle button, to switch between views.
TIP: While in the POI view, tap on the screen to see additional information in the lower
row such as altitude difference between current position and POI and estimated time of
arrival (ETA) or en route (ETE).
In the map view, other POIs nearby are shown in gray. Tap on the screen to switch between
the overview map and a more detailed view. In the detailed view, you adjust the zoom level
by pressing the middle button and then zooming in and out with the upper and lower buttons.
40